List of currently supported sources

The distributed video wall management system support a number of source types and formats. Project specific sources, which we don't support yet, can be added.

Following, you'll find a list of all currently supported sources.

supported source types in the distributed displayDriver

Wey Distribution Platform

The WDP System von WEY TEC  is an KVM over IP solution, which allows video signals (VGA, DVI, HDMI und DP), Audio and Keyboard/Mouse  to be streamed accross the network. The WEY streams can be directly decoded by the meetwise MDD system with very low latency.  This even allows the operators to work directly on the videowall. The MDD system can be controlled and managed by the Wey WDP server. This allow the setup of a fully integrated control room solution, with the perfect combination of KVM and video wall.

Wey transmitters (encoders) support resolutions up to DualLink DVI-D 2560x1600@60Hz and DP with 4k@30Hz and stereo audio.

KVM over IP - remote Desktop Hardware

We can decode and display KVM over IP Streams vor various vendors: Wey WDP2, raritan KX3 family, Adder iPeps and Infinity Series.

The KVM over IP solution support resolutions up to DualLink DVI-D 2560x1600@60Hz.

VNC - remote Desktop Servers

The system supports the display of VNC streams form different software server (r.g. RealVNC, TightVNC, UltraVNC) and from VNC server from virtual machines.

When used in combination with TC units, VNC can also be scaled across multiple Screens.

DVI / HDMI - h.264 digital video encoders

HDMi encoders are able to encode HDMI and single link DVI-D Signals. Additionally audio from analog or HDMI sources can be encoded. The encoder is best used for moving images like Receiver, DVD-Players and PC with video surveillance applications.

Supported Models:

 

  • Antrica ANT-6000E
  • Black box VS2000
  • Crestron DM-TXRX-100-STR
  • Matrox Maevex E5150F (ein Eingang) - MVX-E5150F
  • Matrox Maevex 6100 PCI card ((4 Eingänge) - MVX-E6100-4
  • Matrox Maevex 6120 Appliance (2 Eingänge) - MVX-E6120-2
  • Matrox Maevex 6150 Appliance (4 Eingänge) - MVX-E6150
  • Teracue ENC 400

TV Server - DVB S2/C/T Streaming

Wir support TV IP headend server solution from

These server stream multiple DVB channels in parallel to the network. This allows us to decode these streams in parallel and display them accross the network. SD and HD channels are supported

2N intercoms

Current IP intercoms from 2N, which support h-264 or MJPEG streams are supported.

The following models have been tested:

  • 2N IP Solo
  • 2N IP Force

Avigilon IP Cameras

IP cams and encoder from Avigilon from generation 3 and 4  are supported. Older Models from Generation 1 and 2 are not supported in our system due to the lack of rtsp stream generation capabilities.

The following models have been tested:

  • Avigilon 1.0C-H4A-DO1,Avigilon 12W-H3-4MH-DO1, Avigilon 12W-H3-4MH-DO1-B, Avigilon 12W-H3-4MH-DP1, Avigilon 12W-H3-4MH-DP1-B, Avigilon 2.0-H3-D1-IR, Avigilon 2.0-H3-DO1-IR, Avigilon 2.0C-H4A-BO2-IR, Avigilon 2.0C-H4A-DO1-IR, Avigilon 2.0C-H4PTZ-DP30, Avigilon 2.0W-H3-BO1-IR, Avigilon 2.0W-H3-BO2-IR, Avigilon 2.0W-H3PTZ-DP20, Avigilon 3.0C-H4A-BO1-IR, Avigilon 3.0C-H4A-DP1-IR, Avigilon 3.0W-H3-B3, Avigilon 3.0W-H3-BO1-IR, Avigilon 3.0W-H3-BO2-IR, Avigilon 9W-H3-3MH-DO1, Avigilon 9W-H3-3MH-DO1-B, Avigilon 9W-H3-3MH-DP1, Avigilon 9W-H3-3MH-DP1-B, Avigilon ENC-4P-H264

Not supported (Generation 1 und 2 Models):

  • Avigilon ENC-4Port-2AI, Avigilon 1.0MP-HD-DOME-DN, Avigilon 1.0MP-HD-DOME-DN-IR, Avigilon 2.0MP-HD-DOME-DN-H, Avigilon 29MP-HD-PRO-C

 

 

AXIS IP cameras and encoder

current models from AXIS, which support H.264 encoding are directly supported.

Bosch VIP Kameras und Encoder

Bosch IP cameras and encoders - SD und HD resolutions- from the VIP range are fully supported.

Dallmeier IP Cameras

Current IP cams and encoder from Dallmeier, which support h-264 or MJPEG streams are supported.

The following models have been tested:

  • Dallmeier Microstreamer

Eneo IP Cameras

Current IP cams and encoder from ENEO, which support h-264 or MJPEG streams are supported.

The following models have been tested:

  • Eneo PXB
  • Eneo GXC

FLIR IP Cameras

Current IP cams and encoder from FLIR, which support h-264 or MJPEG streams are supported.

The following models have been tested:

  • FC-Series
  • F-Series

HIKVISION IP Cameras

Current IP cams and encoder from HIKVISION, which support h-264 or MJPEG streams are supported.

Mobotix IP cameras

IP cameras from mobotix are supported.

The cameras from generation 6 and onwards support also multicast Streams, older molders only support MJPEG unicast streams.

Panasonic IP Cameras

Current IP cams and encoder from Panasonic, which support h-264 or MJPEG streams are supported.

The following models have been tested:

  • Panasonic WV-NW964
  • Panasonic WV-SW396

Samsung IP Cameras

Current IP cams and encoder from Samsung, which support h-264 or MJPEG streams are supported.

The following models have been tested:

  • Samsung SNP-6320RH

Siqura Encoder

The Siqura MPEG4 Video encoders of serie S50 are supported.

Sony IP Cameras

Current IP cams and encoder from Sony, which support h-264 or MJPEG streams are supported.

The following models have been tested:

  • SNC-CH180
  • SNVC-DH140
  • SNC-EB602R
  • SNC-ER585 H264
  • SNC-VB600 H264
  • SNC-VM600 H264
  • SNC-XM632

sprinx Videoencoder

Video encoder from Sprinx, which are able to deliver an RTSP stream are supported

The following models have been tested:

  • Sprinx VX241B

Your encoder / cameras

is missing in our list?

Please get in touch with us, so that we can check whether and how this device can be supported. We are generally open  to support new encoders, and our open approach generally allows the easy integration of new source types.